There are 2 ways to do this, I will start with the simplest one: l2asrv.exe

Downloads
Official L2walker Site: http://www.tt2xz.com/
Official Download Page: http://www.tt2xz.com/download.htm
L2Walker Download Mirror: http://mirror.thedarkcitadel.com/ind...rams/L2Walker/
Verify Server Emulator: http://rapidshare.de/files/9468081/l2asrv.zip.html

Step 1 Download a clean bot (IG:1.47 / OOG:10.6.6) from either the official l2walker site or the mirror given above

Step 2 Download the Auth Server Emulator From the page given above

Step 3 Open your Hosts file in Notepad (usually at CWindows\System32\Drivers\Etc ) and copy paste the following into it
127.0.0.1 vip.tt2xz.com
127.0.0.1 vip1.tt2xz.com
127.0.0.1 vip2.tt2xz.com
127.0.0.1 vip3.tt2xz.com
127.0.0.1 vip4.tt2xz.com
127.0.0.1 vip5.tt2xz.com
127.0.0.1 vip6.tt2xz.com
127.0.0.1 vip7.tt2xz.com
Save and close the Hosts file

Step 4 Extract both the server emulator and the bot to a directory on your hard drive (I find it easier to keep both the emulator and the bot in the same directory)

Step 5
Start l2asrv.exe

Step 6 Start L2walker , enter your login details, choose your server and click login

that's it

PS It is best if you download the newest bot available, and keep your bot up to date. Though official auth doesn't change often (from c3 -> c4 the only change was to protocol version) newer bots have features you might need
Bots come preconfigured to connect to official servers, there are no changes need in set.ini. If however you wish to create a menu for official servers in an existing bot the needed entries in set.ini to connect to NA servers are as follows:
[USA]
LoginServerIP=L2authd.Lineage2.com
LoginServerPort=2106
ProtocolVersion=656
ServerList=[1]Bartz;[2]Sieghardt;[3]Kain;[4]Lionna;[5]Erica;[6]Gustin;[7]Devianne;[8]Hindemith;[9]Teon;

=============================================
Second (and more complicated) way to connect to official servers follows. This in my experience offers NO benefits over the far simpler l2asrv.exe method

Step 1 Download a clean bot (IG:1.47 / OOG:10.6.6) from either the official l2walker site or the mirror given above

Step 2: Install the Microsoft Loopback Adapter.

1. Right-click My Computer, and then select Properties. Depending on the style of the start menu, My Computer may be located in the Start menu.
2. In the System Properties dialog box, on the Hardware tab, click Add Hardware Wizard.
3. In the Add Hardware dialog box, click Next.
4. When the "Is the hardware connected?" dialog box appears, click Yes, I have already connected the hardware, and then click Next.
5. In the Installed hardware list, click Add a new hardware device, and then click Next.
6. In the What do you want the wizard to do? list, click Install the hardware that I manually select from a list (Advanced), and then click Next.
7. In the Common hardware types list, click Network adapters, and then click Next.
8. In the Manufacturer list, click Microsoft.
9. In the Network Adapter list, click Microsoft Loopback Adapter, and then click Next twice.
10. If a message about driver signing appears, click Continue Anyway.
11. In the Completing the Add Hardware Wizard dialog box, click Finish, and then click OK.


Step 3: Set Loopback Properties

1. Go to network connections and configure TCP/IP for the new connection (it will say microsoft loop back adapter under properties)
2. set ip to 61.152.151.250
3. subnet 255.255.255.0, the rest of the fields blank


Step 4: Change Hosts File

1. Locate your hosts file, in Cwindows\system32\drivers\etc\hosts
2. Open the file with Notepad or some other editor and add this line to the bottom:
61.152.151.250 L2authd.Lineage2.com


Step 5: Instal TCP Tunnel

1. Go to www.download.com and download the utility called TCP Tunnel
2. Unzip TCP Tunnel to your L2Walker directory
3. Visit http://www.dnsstuff.com/tools/ping.c...d.Lineage2.com and see the current IP of the authserver (this has been changing alot latelly the current ip at the time of writting this was
216.107.242.195 and this is IP is used, if you see a different IP please replace the new IP were needed)
4. Make a new text file in your L2walker directory with the following text and name the file something like "pforward.bat" (Make sure you have windows set to always show file extensions):

tcptunnel -listenport 2106 -tohost 216.107.242.195 -toport 2106
pause

(Remember to check if this IP is still valid by visiting http://www.dnsstuff.com/tools/ping.c...d.Lineage2.com )
5. Save and close the file

Step 6: Open the batch file you just made

Step 7: Launch l2walker and connect

PS It is best if you download the newest bot available, and keep your bot up to date. Though official auth doesn't change often (from c3 -> c4 the only change was to protocol version) newer bots have features you might need
Bots come preconfigured to connect to official servers, there are no changes need in set.ini. If however you wish to create a menu for official servers in an existing bot the needed entries in set.ini to connect to NA servers are as follows:
[USA]
LoginServerIP=L2authd.Lineage2.com
LoginServerPort=2106
ProtocolVersion=656
ServerList=[1]Bartz;[2]Sieghardt;[3]Kain;[4]Lionna;[5]Erica;[6]Gustin;[7]Devianne;[8]Hindemith;[9]Teon;
Remember all you are doing is bypassing the requirement to actually purchase l2walker. Official servers have NO antibot features

+ Recent posts